AMC1311-Q1 - Automotive 2V Input, Reinforced Isolated Amplifier With High CMTI for Voltage Sensing

The AMC1311-Q1 is a precision, isolated amplifier with an outputseparated from the input circuitry by an isolation barrier that is highly resistant to magneticinterference. This barrier is certified to provide reinforced galvanic isolation ofup to 7 kV_PEAK according to VDE V 0884-11and UL1577. Used in conjunction with isolated power supplies, this isolated amplifier separatesparts of the system that operate on different common-mode voltage levels and protects lower-voltageparts from damage.

The high-impedance input of the AMC1311-Q1 is optimized for connectionto high-voltage resistive dividers or other voltage signal sources with high output resistance. Theexcellent performance of the device supports accurate, low temperature drift voltage or temperaturesensing and control in closed-loop systems. The integrated missing high-side supply voltagedetection feature simplifies system-level design and diagnostics.

The AMC1311-Q1 is offered with two performance gradeoptions: AMC1311-Q1 and AMC1311B-Q1.

• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
  • Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
  • Device HBM ESD Classification Level 2
  • Device CDM ESD Classification Level C6
• 2-V, High-Impedance Input Voltage Range Optimized for Isolated Voltage Measurement
• Low Offset Error and Drift:
  • AMC1311B-Q1: ±1.5 mV (max), ±15 µV/°C (max)
  • AMC1311-Q1: ±9.9 mV (max), ±20 µV/°C (typ)
• Fixed Gain: 1
• Very Low Gain Error and Drift:
  • AMC1311B-Q1: ±0.3% (max), ±45 ppm/°C (max)
  • AMC1311-Q1: ±1% (max), ±30 ppm/°C (typ)
• Low Nonlinearity and Drift: 0.01%, 1 ppm/°C (typ)
• 3.3-V Operation on High-Side (AMC1311B-Q1)
• Missing High-Side Supply Indication
• Safety-Related Certifications:
  • 7000-V_PK Reinforced Isolation per DIN V VDE V 0884-11 (VDE V 0884-11): 2017-01
  • 5000-V_RMS Isolation for 1 Minute per UL1577
  • CAN/CSA No. 5A-Component Acceptance Service Notice

All trademarks are the property of their respective owners.