The TPA3140D2 is anefficient, Class-D audio power amplifier for driving bridged-tied stereo speakers at up to10 W, 6 Ω, or 8 Ω (perchannel).
Advanced EMI Suppression Technology with Spread Spectrum Control and 1SPW modulation schemeenables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirementsfor system cost reduction. TPA3140D2 is not only fully protected against shorts and overload, theSpeakerGuard™ speaker protection circuitry includesan adjustable Automatic Gain Limit (AGL), an adjustable power limiter anda DC detection circuit for protection of the connected speakers. The AGLallows adjustment of the maximum output voltage without signal clipping for enhanced speakerprotection and audio quality. The DC detect and Pin-to-Pin, Pin-to-Ground, and Pin-to-Power Short Circuit protectioncircuit protect the speakers from output DC and pin shorts caused in production. The outputs arealso fully protected against shorts to GND, PVCC, and output-to-output. The short-circuitprotection and thermal protection includes an auto recovery feature.
The TPA3140D2 candrive stereo speakers with as low as 4-Ω impedance. The high efficiency of theTPA3140D2, 90% with an 8-Ωload, eliminates the need for an external heat sink, and TPA3140D2 will be able to outputfull power on a 2-layer PCB.
Products containing the "TPA3140D2" keyword are: TPA3140D2PWP , TPA3140D2PWP , TPA3140D2PWPEVM , TPA3140D2PWPR , TPA3140D2PWPRAll trademarks are the property of their respective owners.
Status | ACTIVE |
SubFamily | Speaker amps |
Audio input type | Analog Input |
Architecture | Class-D |
Speaker Channels | Stereo |
Power stage supply | 14.4 |
Output power | 10 |
Load | 2 |
SNR | 102 |
THD + N @ 1 kHz | 0.04 |
Iq | 35 |
Control interface | Hardware |
Closed/open loop | Closed |
Approx. price | 1.30 | 1ku |
Analog supply | 14.4 |
Power to parallel bridge tied load | 28 |
Sampling Rate | |
PSRR | 80 |
Operating temperature range | -40 to 85 |
Rating | Catalog |