The TPA3117D2 is a 15W (per channel) efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers. Advanced EMI Suppression Technology enables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirements. SpeakerGuard™ speaker protection circuitry includes an adjustable power limiter. The adjustable power limiter allows the user to set a "virtual" voltage rail lower than the chip supply to limit the amount of current through the speaker.
The TPA3117D2 can drive stereo speakers as low as 4. The high efficiency of the TPA3117D2, 90%, eliminates the need for an external heat sink when playing music.
The outputs are also fully protected against shorts to GND, VCC, and output-to-output. The short-circuit protection and thermal protection includes an auto-recovery feature.
Products containing the "TPA3117D2" keyword are: TPA3117D2EVM , TPA3117D2RHBR , TPA3117D2RHBR , TPA3117D2RHBT , TPA3117D2RHBTSpeakerGuard is a trademark of Texas Instruments.
Status | ACTIVE |
SubFamily | Speaker amps |
Audio input type | Analog Input |
Architecture | Class-D |
Speaker Channels | Stereo |
Power stage supply | 26 |
Output power | 15 |
Load | 4 |
SNR | 102 |
THD + N @ 1 kHz | 0.1 |
Iq | 10 |
Control interface | Hardware |
Closed/open loop | Closed |
Approx. price | 0.90 | 1ku |
Analog supply | 26 |
Power to parallel bridge tied load | 30 |
Sampling Rate | |
PSRR | 72 |
Operating temperature range | -40 to 85 |
Rating | Catalog |