TAS5760M - Closed Loop I2S Input Amplifier with Power Limiter, PVDDmax of 26.4V

The TAS5760M is a stereo I2S input device which includes hardware andsoftware (I²C) control modes, integrateddigital clipper, severalgain options, and a wide power supply operating range to enable use in a multitude of applications.The TAS5760M operates with a nominal supply voltage from 4.5 to24 VDC.

An optimal mix of thermal performance and device cost is provided in the120-mΩ R_DS(ON) of the output MOSFETs. Additionally, athermally enhanced 48-Pin TSSOP provides excellent operation in the elevated ambienttemperatures found in modern consumer electronic devices.

The entire TAS5760xx family is pin-to-pin compatible in the 48-Pin TSSOPpackage. Alternatively,to achieve the smallest possible solutions size for applications where pin-to-pin compatibility anda headphone or line driver are not required, a 32-Pin TSSOP package is offered for the TAS5760M andTAS5760L devices. The I²C register map in all of the TAS5760xx devicesare identical, to ensure low development overhead when choosing between devices based uponsystem-level requirements.

• Audio I/O Configuration:
  • Single Stereo I²S Input
  • Stereo Bridge Tied Load (BTL) or Mono Parallel Bridge Tied Load (PBTL) Operation
  • 32, 44.1, 48, 88.2, 96 kHz Sample Rates
• General Operational Features:
  • Selectable Hardware or Software Control
  • Integrated Digital Output Clipper
  • Programmable I²C Address (1101100[^R/_W] or 1101101[^R/_W])
  • Closed-Loop Amplifier Architecture
  • Adjustable Switching Frequency for Speaker Amplifier
• Robustness Features:
  • Clock Error, DC, and Short-Circuit Protection
  • Overtemperature and Programmable Overcurrent Protection
• Audio Performance (PVDD = 19 V, R_SPK = 8 Ω, SPK_GAIN[1:0] Pins = 01)
  • Idle Channel Noise = 100 µVrms (A-Wtd)
  • THD+N = 0.03% (at 1 W, 1 kHz)
  • SNR = 100 dB A-Wtd (Ref. to THD+N = 1%)

All trademarks are the property of their respective owners.