The ’AHC126 devices are quadruple bus buffer gates featuring independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is low. When OE is high, the respective gate passes the data from the A input to its Y output.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
| Status | ACTIVE |
| SubFamily | Non-Inverting buffer/driver |
| Technology Family | AHC |
| VCC | 5.5 |
| Bits | 4 |
| Voltage | 3.3^5.5 |
| F @ nom voltage | 110 |
| tpd @ Nom Voltage | 13^10 |
| ICC @ nom voltage | 0.04 |
| IOL | 8 |
| IOH | -8 |
| Rating | Military |
| Operating temperature range | -55 to 125 |
| Package Group | CFP|14 |
| Package size: mm2:W x L (PKG) | See datasheet (CFP) |
| Approx. price |